reinstalled after WCCAP workshop

MPSS installed, the CPC used is now the TSI_3772, previously used as totCPC.

Sheathflow pump installed as compressed air, not in vacuum (as it was before), following WCCAP suggestion. Flow 4.8L/min (ambient)
HV voltage calibration:

• 0.4mV:
  • from -0.0039 (1.8v)
  • to -0.0016 (5.2V)
• 800mV:
  • 0.789 oscillating a bit between 996V to 1002V
• 200mV:
  • 249V

PSL cal, sheath flow slope re-adjusted from 1.3 (peak 196nm) to 1.2 (peak 200nm)

Back to UTC time (UTC+2 used while at WCCAP)

Measurment mode ON

Next step: grounding DMA